banner_page

TOP254PN

7 Terminations8 Pin AC to DC power converterTOPSwitch?-HX Series 1 OutputsMin 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-TOP254PN
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 216
  • Description: 7 Terminations8 Pin AC to DC power converterTOPSwitch?-HX Series 1 OutputsMin 85V VMax 265V V(Kg)

Details

Tags

Parameters
Max Power Dissipation 47W
Technology CMOS
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 66kHz
JESD-30 Code R-PDIP-T7
Number of Outputs 1
Output Voltage 700V
Max Output Current 2.08A
Min Supply Voltage 36V
Analog IC - Other Type ANALOG CIRCUIT
Nominal Supply Current 1.3mA
Output Power 20W
Topology Flyback
Min Input Voltage 85V
Control Mode VOLTAGE-MODE
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Temperature, Over Voltage
Max Duty Cycle 78 %
Max Supply Voltage (AC) 265V
Duty Cycle 78%
Output Isolation Isolated
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height 3.68mm
Length 9.83mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2009
Series TOPSwitch®-HX
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
Termination Through Hole
Terminal Finish PURE MATTE TIN
Power (Watts) 28W
Additional Feature SEATED_HT CALCULATED
Subcategory Switching Regulator or Controllers
Power Rating 47W

TOP254PN Overview


It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The ac dc converter is available in Tube case.This AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.There are a total of 7 terminations in it.The ac/dc converter has a total of 8 pins.There are no problem mounting the ac dc converters by Through Hole .The product is acdc converter of the TOPSwitch?-HX manufacturer family.There are 1 outputs to be run.Switching Regulator or Controllers contains the ac to dc conversions.There is 700V output voltage from this AC/DC converter.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 66kHz .You can read the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 265V .In the AC to DC transformer of a coverter, the output power generated is 20W .Using this ACDC converter, SEATED_HT CALCULATED is also accessible.The AC to DC inverter can be used with an input voltage of less than 85V V.There is a minimum supply voltage of 85V across the converter.This converter can operate at a maximum supply voltage of 265V .AC to DC power converters should be able to accept input voltages (AC) below 265V .If the supply voltage is set to 36V , then it can operate.

TOP254PN Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins

TOP254PN Applications


There are a lot of Power Integrations TOP254PN AC DC Converters applications.

  • AC?DC USB chargers for Cameras
  • Appliances
  • MPS parts
  • AC?DC USB chargers for Cell Phones
  • WiFi Wireless
  • Air Conditioning
  • Standby Power Supply
  • Standby and Auxiliary Power Supplies Set Top Boxes (STB)
  • Battery chargers for cordless
  • Low power ac?dc Adapters for Chargers

Write a review

Note: HTML is not translated!
    Bad           Good