TOP255EN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TOPSwitch®-HX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | PURE MATTE TIN |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 81W |
| Max Power Dissipation | 81W |
| Technology | CMOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Frequency | 66kHz |
| JESD-30 Code | R-PZIP-T6 |
| Number of Outputs | 2 |
| Output Voltage | 700V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 1.3mA |
| Power Dissipation | 26W |
| Output Current | 2.72A |
| Output Power | 57W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage |
| Max Duty Cycle | 83 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 8.25mm |
| Length | 10.24mm |
| Width | 2.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP255EN Overview
There is a ac to dc converter embedded in package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.When the switching frequency reaches 66kHz 132kHz , the circuit is closed.There have been 6 terminations of this program.Approximately 7 pins are present on the ac/dc converter.It is suitable for mounting by Through Hole .The AC to DC converter belongs to the manufacturer family of TOPSwitch?-HX .A total of 2 outputs are available for processing.The ac to dc conversions are included in Switching Regulator or Controllers .It has been set to 2.72A for the output current.The output voltage of the AC/DC converter is 700V .A high efficiency is achieved when operating at a frequency of 66kHz .It is possible to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.In the AC to DC transformer of a coverter, the output power is 57W .Input voltages less than 85V volts can be used to operate the AC to DC inverter.A voltage of 85V is the minimum supply voltage across the converter.Across the converter, a maximum supply voltage of 265V may be applied.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
TOP255EN Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz 132kHz
With 7 pins
Output Current at 2.72A
TOP255EN Applications
There are a lot of Power Integrations TOP255EN AC DC Converters applications.
- AC/DC LED Driver applications
- Battery chargers for mobile devices with touchpad display
- Small off-line low voltage power supplies
- Smartphones
- AC?DC USB chargers for Cameras
- Industrial controls
- White goods
- Shaver Charger
- Portable Apparatus
- Chargers for cell/cordless phones
