TOP264EG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | TOPSwitch®-JX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Power Rating | 62W |
| Max Power Dissipation | 43W |
| Technology | CMOS |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Power | 43W |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 78 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 8.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP264EG Overview
It is embedded in package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .Tube case is available for the ac dc converter.It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .There is 66kHz 132kHz switching frequency.There are 7 pins on this ac/dc converter.It belongs to the family of TOPSwitch?-JX manufacturers.The number of outputs to run is 1 .You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.There is 43W output power generated by a coverter.If the input voltage is less than 85V V, the AC to DC inverter can be used.A minimum voltage of 85V is required across the converter.265V is the maximum supply voltage across the converter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
TOP264EG Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz 132kHz
With 7 pins
TOP264EG Applications
There are a lot of Power Integrations TOP264EG AC DC Converters applications.
- Chargers for cell/cordless phones
- Humidifier
- Adapters for Handheld Electronics
- WiFi Wireless
- Switching AC-DC Charger
- Battery chargers for cellular phones
- Vacuum Cleaner
- Wireless System
- Adapter/Charger for Cell
- MP3
