TOP264KG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 12 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | TOPSwitch®-JX |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Power Rating | 49W |
| Max Power Dissipation | 30W |
| Technology | CMOS |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Output Current | 2.08A |
| Output Power | 30W |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 83 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 78% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP264KG Overview
There is a ac to dc converter embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .The ac dc converter is available in Tube case.There is a mounting point for this AC/DC converter in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.As soon as the switching frequency reaches 66kHz 132kHz , the circuit is closed.In this ac/dc converter, there are 12 pins.This AC to DC converter belongs to the TOPSwitch?-JX manufacturer family.The number of outputs to run is 1 .It has been set to 2.08A for the output current.It is possible to read the REACH SVHC standard at: No SVHC .It is available to power the AC to DC converter input voltage under 265V .There is 30W output power generated by a coverter.It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.There is a minimum supply voltage of 85V across the converter.Across the converter, a maximum supply voltage of 265V may be applied.The AC to DC power converter's input voltage (AC) should be below 265V .
TOP264KG Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 66kHz 132kHz
With 12 pins
Output Current at 2.08A
TOP264KG Applications
There are a lot of Power Integrations TOP264KG AC DC Converters applications.
- Open Frame Switching Power Supply
- Battery chargers for mobile devices with touchpad display
- Power Adaptors
- Humidifier
- Z-Wave
- Automotive Infotainment
- Power tools fast chargers with trickle and on/off
- Replacements for bulky plug-in transformers
- Switching AC-DC Charger
- Standby Power Supply
