Parameters |
Height Seated (Max) |
2.34mm |
Length |
8.89mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
12-SDIP (0.412, 10.46mm) Exposed Pad |
Number of Pins |
12 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
TOPSwitch®-JX |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Terminal Finish |
MATTE TIN |
Power Rating |
34W |
Max Power Dissipation |
22.5W |
Technology |
CMOS |
Number of Functions |
1 |
Number of Outputs |
1 |
Output Voltage |
12V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Nominal Supply Current |
3.1mA |
Output Power |
22.5W |
Control Features |
Frequency Control |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
66kHz 132kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
78% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
TOP264VG Overview
In the 12-SDIP (0.412, 10.46mm) Exposed Pad package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .The AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.In this AC to DC transformer, the switching frequency is 66kHz 132kHz .There are 12 pins on this ac/dc converter.It belongs to the family of TOPSwitch?-JX manufacturers.A total of 1 outputs need to be run.The voltage output by this AC/DC converter is 12V .You are able to read the REACH SVHC standard at: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .It is assumed that a coverter generates 22.5W as its output power.The AC to DC inverter may be operated with an input voltage less than 85V volts.There should be no less than 85V voltage across the converter.There is a maximum voltage supply across the converter of 265V volts.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
TOP264VG Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 66kHz 132kHz
With 12 pins
TOP264VG Applications
There are a lot of Power Integrations TOP264VG AC DC Converters applications.
- Battery chargers for cellular phones
- Battery Chargers
- Switching AC-DC Charger
- WiFi Wireless
- Power adapters for monitors
- Dimmers
- Lighting controls
- White goods
- AC-DC Output Power Conversion Applications
- ATX/BTX Auxiliary Power