Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
12-SDIP (0.412, 10.46mm) Exposed Pad |
Number of Pins |
12 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2010 |
Series |
TOPSwitch®-JX |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Terminal Finish |
MATTE TIN |
Power Rating |
44W |
Max Power Dissipation |
32W |
Technology |
CMOS |
Number of Functions |
1 |
Number of Outputs |
2 |
Output Voltage |
12V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Nominal Supply Current |
3.4mA |
Output Power |
32W |
Control Features |
Frequency Control |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
66kHz 132kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
78% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Length |
8.89mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
TOP267VG Overview
12-SDIP (0.412, 10.46mm) Exposed Pad is the package in which the ac to dc converter is embedded.The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.The switching frequency reaches 66kHz 132kHz .On the ac/dc converter, there are 12 pins.Currently, it is acdc converter of the manufacturer family of TOPSwitch?-JX .In this AC to DC transformer, there are 2 outputs to run.In this AC to DC transformer, the output voltage is 12V .SVHC for REACH can be found in the standard No SVHC .It is available to power the AC to DC converter input voltage under 265V .There is 32W output power generated by a coverter.Input voltages less than 85V volts can be used to operate the AC to DC inverter.A minimum voltage supply across the converter is 85V .This converter can operate at a maximum supply voltage of 265V .It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .
TOP267VG Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 66kHz 132kHz
With 12 pins
TOP267VG Applications
There are a lot of Power Integrations TOP267VG AC DC Converters applications.
- Low-Voltage I/O System Power
- Z-Wave
- Battery chargers for media tablets
- Adapters
- Tablets
- Adapter for ADSL
- Cleaners
- Standby Power Supplies
- Home appliances
- RCC SMPS