Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
12-SDIP (0.412, 10.46mm) Exposed Pad |
Number of Pins |
12 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
TOPSwitch®-JX |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Terminal Finish |
MATTE TIN |
HTS Code |
8542.39.00.01 |
Power Rating |
51W |
Max Power Dissipation |
37.5W |
Technology |
CMOS |
Number of Functions |
1 |
Output Voltage |
12V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Nominal Supply Current |
3.8mA |
Output Power |
37.5W |
Control Features |
Frequency Control |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
66kHz 132kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
78% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height Seated (Max) |
2.34mm |
Length |
8.89mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
TOP269VG Overview
12-SDIP (0.412, 10.46mm) Exposed Pad is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.Switching frequency reaches 66kHz 132kHz Hz.On this ac/dc converter, there are 12 pins.This AC to DC converter belongs to the TOPSwitch?-JX manufacturer family.The voltage output by this AC/DC converter is 12V .REACH SVHC standard can be found at No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.The output power of a coverter generates 37.5W .The AC to DC inverter may be operated with an input voltage less than 85V volts.There is a minimum supply voltage of 85V across the converter.265V is the maximum supply voltage across the converter.AC to DC power converters should be able to accept input voltages (AC) below 265V .
TOP269VG Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 66kHz 132kHz
With 12 pins
TOP269VG Applications
There are a lot of Power Integrations TOP269VG AC DC Converters applications.
- White goods
- AC/DC Adaptors/Chargers for E-books
- Low power ac?dc Adapters for Chargers
- Tablets
- ZigBee
- Power adapters for network devices
- Battery chargers for smart phones
- Replaces linear transformers
- Battery chargers for cordless
- 3.3V power supplies