Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
12-SDIP (0.412, 10.46mm) Exposed Pad |
Number of Pins |
12 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
TOPSwitch®-JX |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Terminal Finish |
MATTE TIN |
Power Rating |
55W |
Max Power Dissipation |
41W |
Technology |
CMOS |
Number of Functions |
1 |
Number of Outputs |
2 |
Output Voltage |
12V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Nominal Supply Current |
3.8mA |
Output Power |
41W |
Control Features |
Frequency Control |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
66kHz 132kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
78% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Length |
8.89mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
TOP270VG Overview
It is embedded in package 12-SDIP (0.412, 10.46mm) Exposed Pad .The ac dc converter is available in Tube case.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.When the switching frequency reaches 66kHz 132kHz , the circuit is closed.The ac/dc converter has a total of 12 pins.A member of the TOPSwitch?-JX manufacturer family, it has the following characteristics.There are 2 outputs to run.The voltage output by this AC/DC converter is 12V .You can read the standard of REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.The output power of a coverter is assumed to be 41W .Input voltages less than 85V volts can be used to operate the AC to DC inverter.Across the converter, the minimum supply voltage is 85V .There is a maximum supply voltage of 265V across the converter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
TOP270VG Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 66kHz 132kHz
With 12 pins
TOP270VG Applications
There are a lot of Power Integrations TOP270VG AC DC Converters applications.
- Charger
- Set-top boxes
- Power Adaptors
- Off--line Battery Charger
- Cleaners
- Universal input AC/DC adapters (15W - 45W)
- 3.3V power supplies
- Laptops and personal digital assistants
- Battery Chargers
- Vacuum Cleaner