TOP271EG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | TOPSwitch®-JX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | MATTE TIN |
| Power Rating | 244W |
| Max Power Dissipation | 177W |
| Technology | CMOS |
| Number of Functions | 1 |
| Number of Outputs | 1 |
| Output Voltage | 19V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 2.1mA |
| Output Power | 177W |
| Control Features | Frequency Control |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz 132kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 78 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 8.25mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
TOP271EG Overview
The ac to dc converter is embedded in 7-SIP, 6 Leads, Exposed Pad, Formed Leads package.Tube case is available for the ac dc converter.There is a AC/DC converter mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.At this point, the switching frequency reaches 66kHz 132kHz .On this ac/dc converter, there are 7 pins.A member of the TOPSwitch?-JX manufacturer family, it has the following characteristics.The number of outputs to run is 1 .There is 19V output voltage from this AC/DC converter.Here is the standard for REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.177W is the output power of a coverter.The AC to DC inverter can be used with an input voltage of less than 85V V.Supply voltage across the converter must be 85V at all times.There is a maximum voltage supply across the converter of 265V volts.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .
TOP271EG Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 66kHz 132kHz
With 7 pins
TOP271EG Applications
There are a lot of Power Integrations TOP271EG AC DC Converters applications.
- Rice Cooker
- WiFi Wireless
- Cleaners
- 3.3V power supplies
- Home appliances
- Laptops
- Battery Chargers
- Small off-line low voltage power supplies
- Standby power
- AC/DC Adaptors/Chargers for Cordless Phone
