banner_page

TP13057BDW

TP13057BDW datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TP13057BDW
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 485
  • Description: TP13057BDW datasheet pdf and Interface - CODECs product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type PCM, Filter
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Codecs
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TP13057
Power Supplies +-5V
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Data Interface Serial
Voltage - Supply, Analog 4.75V~5.25V
Voltage - Supply, Digital 4.75V~5.25V
Number of A/D Converters 1
Number of D/A Converters 2
Resolution (Bits) 8 b
Sigma Delta No
Number of ADCs / DACs 1 / 1
Filter YES
Companding Law A-LAW
Neg Supply Voltage-Nom -5V
Width 7.5mm
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

TP13057BDW Overview


Space-saving is achieved by supplying it in the 16-SOIC (0.295, 7.50mm Width) package. The packaging way of Tube is adopted. This electronic component is of the type PCM, Filter, allowing it to provide high-efficiency performance in various applications. The mounting type of this device is Surface Mount. When the operating performance is set to -40°C~85°C, it can operate normally. Integrated ADCs / DACs are available in 1 / 1. The analog circuit is provided with the supply voltage of 4.75V~5.25V. 4.75V~5.25V provides the supply voltage to the digital circuit. Signals are prevented from reflecting off the end of transmission lines by 16 terminations. The device has a 16-pin configuration. Its base part number TP13057 can be used to find more related items. Surface Mount technology is used for mounting it to a PCB. Ideally, the supply voltage should remain at 5.25V. Digital signals are converted from analog signals using 1 A/D converters. Subcategory Codecs describes this electronic part. It is recommended that the minimum supply voltage be kept at 4.75V. It operates with the supply voltage of 5V. This device runs on +-5V power supplies. Digital signals are converted into analog signals using 2 D/A converters. There is -5V supply voltage that is more negative in polarity than the ground of the circuit.

TP13057BDW Features


Embedded in the 16-SOIC (0.295, 7.50mm Width) package
Operating temperature of -40°C~85°C
1 / 1 ADCs / DACs
1 A/D converters

TP13057BDW Applications


There are a lot of Texas Instruments TP13057BDW CODECs Interface ICs applications.

  • Image compression
  • Spooling or level wind
  • Mobile equipement
  • Subtraction
  • High-performance memory-decoding or data-routing applications
  • Electronics industry
  • Servo motors
  • Automation
  • Feature extraction
  • Image search

Write a review

Note: HTML is not translated!
    Bad           Good