TP3094V/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | COMBO® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Termination | SMD/SMT |
| Type | PCM, Filter |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Codecs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TP3094 |
| Output | VOLTAGE |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | Serial |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 900μA |
| Number of Bits | 32 |
| Supply Current-Max | 0.05mA |
| Data Interface | PCM Audio Interface |
| Signal to Noise Ratio (SNR) | 36 dB |
| Resolution (Bits) | 32 b |
| Number of DAC Channels | 4 |
| Sigma Delta | Yes |
| Number of ADCs / DACs | 4 / 4 |
| Filter | YES |
| Companding Law | A/MU-LAW |
| Height | 4.57mm |
| Length | 16.59mm |
| Width | 16.59mm |
| Thickness | 4.06mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TP3094V/NOPB Overview
A 44-LCC (J-Lead) package is provided to save space. Tube is the packaging method used. This electronic component is of the type PCM, Filter, allowing it to provide high-efficiency performance in various applications. This device employs the mounting type Surface Mount. It is able to operate normally when the operating performance is set at -40°C~85°C. It features 4 / 4 ADCs / DACs. 44 terminations prevent signals from reflecting off transmission lines. The device has a 44-pin configuration. It has a configuration of 44 pins. Its base part number TP3094 can be used to find more related parts. Using Surface Mount technology, it is mounted to a PCB. Supply voltage should be maintained at 5.25V. Electronic parts classified as Codecs are located in this subcategory. Minimum supply voltage should remain at 4.75V. A voltage of 5V is required to operate the device. The power supply for this device is 5V. It is able to operate from the supply voltage of 5V. Data transmission is achieved through 1 channels. Information is stored in 32 bits. Part of the family of COMBO? series, this electronic component can be used in a wide range of applications. They can operate with ease if the supply current is kept below 0.05mA. An analog output can be sampled from a numerical value by 4 DAC channels. In order for it to operate, the supply voltage must be 900μA.
TP3094V/NOPB Features
Embedded in the 44-LCC (J-Lead) package
Operating temperature of -40°C~85°C
4 / 4 ADCs / DACs
Operating supply current of 900μA
TP3094V/NOPB Applications
There are a lot of Texas Instruments TP3094V/NOPB CODECs Interface ICs applications.
- Filling
- Elevators
- Subtraction
- Full adders
- Flight simulators
- Metal forming & fabrication
- Robotics
- X-Y positioning
- Textiles
- Chemical dosing pumps
