TPA0103PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Input Multiplexer, Mute, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE AT 3.3V SUPPLY |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.4W |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA0103 |
| Pin Count | 24 |
| Output Type | 3-Channel |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Nominal Supply Current | 25mA |
| Power Dissipation | 1.4W |
| Quiescent Current | 19mA |
| Output Power | 2.1W |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 35mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 2.1W |
| Max Output Power x Channels @ Load | 2.1W x 1 @ 4 Ω; 575mW x 2 @ 4 Ω |
| Harmonic Distortion | 1% |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA0103PWP Overview
The device is embedded in 24-TSSOP (0.173, 4.40mm Width) Exposed Pad .The device is in the form of Tube .In addition, there are 24 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured to produce 3-Channel as Amp partss output.There is Class AB type of electrical device associated with this device.In a computer or other communication device, there are two pronged contacts called 24 pins.This electronic part is mounted in the way of Surface Mount .This electrical device is powered by 3V~5.5V volts.Amp parts is equipped wAmp partsh 3 channels.During operation, Input Multiplexer, Mute, Shutdown can be ensured.A maximum operating temperature of -40°C~85°C TA should be maintained.The device contains 24 pins.As part of Audio/Video Amplifiers , this part is included.Amp parts is a member of the family TPA0103 .There is an electronic component mounted in the way of Surface Mount .According to the manufacturer, the maximum output power of this electronic component is 2.1W kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 3V .There is a supply type of Single for this electronic part.There is 19mA external influence on the consumption of quiescent current: it consumes 19mA of quiescent current.This chip has a feature number of CAN ALSO OPERATE AT 3.3V SUPPLY .
TPA0103PWP Features
24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
24 pin count
TPA0103 family
2.1W kWh per hour
TPA0103PWP Applications
There are a lot of Texas Instruments TPA0103PWP audio amplifiers applications.
- Professional videography
- Test equipment
- single/dual op amp sum and difference circuits
- Comparator
- Active probe
- Medical imaging
- Semiconductor detectors
- High/low-pass filter circuit
- Band-pass filter
- Video and image computer boards
