TPA0103PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Input Multiplexer, Mute, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.4W |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA0103 |
| Pin Count | 24 |
| Output Type | 3-Channel |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 3 |
| Number of Circuits | 3 |
| Nominal Supply Current | 19mA |
| Power Dissipation | 1.4W |
| Quiescent Current | 19mA |
| Output Power | 2.1W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 2.1W |
| Max Output Power x Channels @ Load | 2.1W x 1 @ 4 Ω; 575mW x 2 @ 4 Ω |
| Harmonic Distortion | 1% |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA0103PWPR Overview
There is a device embedded in 24-TSSOP (0.173, 4.40mm Width) Exposed Pad .Ideally, the chip should be packaged in a Tape & Reel (TR) case.In 24 terminations, a transmission line is terminated with a device that matches its characteristic impedance.Amp parts uses 3-Channel as the output.There is Class AB type of electrical device associated with this device.24 pins are pronged contacts on a computer or other communication device that form a signal interface.Amp parts is mounted in front of Surface Mount .Amp parts is powered by a voltage of 3V~5.5V volts.There are no channels on the device.Amp parts is possible to operate wAmp partsh Input Multiplexer, Mute, Shutdown .A maximum operating temperature of -40°C~85°C TA should be maintained.A total of 24 pins are present on the device.Amp parts is included in Audio/Video Amplifiers .The TPA0103 family contains this object.Its recommended mounting way belongs to Surface Mount .A maximum output power of 2.1W kWh per hour can be achieved with this electronic part.Amp parts is recommended that the supply voltage (Vsup) be maintained above 3V for normal operation.A Single supply type is used for this electronic part.Despite being unaffected by external factors, it consumes 19mA of quiescent current.3 circuits are used to achieve its superior flexibility.
TPA0103PWPR Features
24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
24 pin count
TPA0103 family
2.1W kWh per hour
TPA0103PWPR Applications
There are a lot of Texas Instruments TPA0103PWPR audio amplifiers applications.
- Industrial control system
- Oscilloscopes
- Comparator
- Multiplication and division circuits
- Broadcasting
- Addition and subtraction operation circuits
- High gain DC amplifier
- Test equipment
- Power transmission
- Biopotential
