Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
18.99418mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Depop, Shutdown |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
2.14W |
Technology |
CMOS |
Voltage - Supply |
2.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Base Part Number |
TPA0211 |
Pin Count |
8 |
Output Type |
1-Channel (Mono) with Mono Headphones |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Supply Voltage-Min (Vsup) |
2.5V |
Number of Channels |
1 |
Nominal Supply Current |
6mA |
Power Dissipation |
2.14W |
Quiescent Current |
4mA |
Output Power |
2W |
Supply Type |
Single |
Bandwidth |
20 kHz |
Power Supply Rejection Ratio (PSRR) |
58dB |
Gain |
2.5 dB |
Max Output Power |
2W |
Max Output Power x Channels @ Load |
2W x 1 @ 4 Ω; 92mW x 1 @ 32 Ω |
Harmonic Distortion |
1% |
Load Impedance |
4Ohm |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPA0211DGNG4 Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is embedded.Chips should be packaged in Tube cases.There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) with Mono Headphones .This electrical device has the type Class AB .8 pins are pronged contacts on a computer or other communication device that form a signal interface.Amp parts is mounted in front of Surface Mount .This electrical device has a supply voltage of 2.5V~5.5V .This device is equipped with a total of 1 channels.When operating, it is possible to ensure Depop, Shutdown .No temperature higher than -40°C~85°C TA should be used for operations.A total of 8 pins are present on the device.The part belongs to Audio/Video Amplifiers .Amp parts is a member of the TPA0211 family.An electronic part such as this has a maximum output power of 2W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.The maximum supply voltage (Vsup) is reached at 5.5V .This electronic part has a Single supply type.Amp parts is powered by a 3/5V volt power supply.Despite being unaffected by external factors, it consumes 4mA of quiescent current.
TPA0211DGNG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA0211 family
2W kWh per hour
TPA0211DGNG4 Applications
There are a lot of Texas Instruments TPA0211DGNG4 audio amplifiers applications.
- Band-pass filter
- Medical imaging
- Signal operation
- Multiplication and division circuits
- single/dual op amp sum and difference circuits
- Integrator and differentiator circuits
- Industrial control system
- High gain DC amplifier
- Radar
- Information processing