TPA0233DGQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA0233 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) with Stereo Headphones |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 7mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 7mA |
| Quiescent Current | 4mA |
| Output Power | 2W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Gain | 2.5 dB |
| Max Output Power | 2W |
| Max Output Power x Channels @ Load | 2W x 1 @ 4 Ω; 92mW x 2 @ 32 Ω |
| Harmonic Distortion | 1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA0233DGQ Overview
The device is embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in the case Tube .In addition, 10 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Amp parts uses 1-Channel (Mono) with Stereo Headphones as the output.Amp parts is an electrical device of type Class AB .Computers or other communication devices have 10 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .There is 2.5V~5.5V voltage supply to this electrical device.This device is equipped with a total of 1 channels.During operation, Depop, Shutdown can be ensured.The operating temperature should not exceed -40°C~85°C TA .A total of 10 pins are present on the device.This part is included in Audio/Video Amplifiers .This is a member of the TPA0233 family.There is a maximum output power of 2W kWh per hour from this electronic component.The supply voltage (Vsup) should be kept above 2.5V for normal operation.Vsup reaches 5.5V at the maximum.Single is the type of supply for this electronic part.Amp parts operates from a 3/5V power supply.Without external influences, it consumes 4mA of quiescent current.
TPA0233DGQ Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
TPA0233 family
2W kWh per hour
TPA0233DGQ Applications
There are a lot of Texas Instruments TPA0233DGQ audio amplifiers applications.
- Weak signal detection
- Precision measurement
- Broadcasting
- Vehicle electronics
- Band-pass filter
- ECG equipment
- Video conversion and routing
- Signal amplification
- High/low-pass filter circuit
- Addition and subtraction operation circuits
