Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
10 |
Weight |
18.795734mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
JESD-609 Code |
e4 |
Feature |
Depop, Shutdown |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
2.14W |
Technology |
CMOS |
Voltage - Supply |
2.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.5mm |
Base Part Number |
TPA0253 |
Pin Count |
10 |
Output Type |
1-Channel (Mono) with Stereo Headphones |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Supply Voltage-Min (Vsup) |
2.5V |
Number of Channels |
1 |
Nominal Supply Current |
4.8mA |
Power Dissipation |
2.14W |
Max Supply Current |
4.8mA |
Quiescent Current |
3.2mA |
Output Power |
1W |
Supply Type |
Single |
Bandwidth |
20 kHz |
Power Supply Rejection Ratio (PSRR) |
62dB |
Gain |
8 dB |
Max Output Power |
1W |
Max Output Power x Channels @ Load |
1W x 1 @ 8 Ω; 85mW x 2 @ 32 Ω |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPA0253DGQR Overview
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad contains an embedded device.Amp parts is packaged in the way of Cut Tape (CT) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 10 termination.The output it is configured with uses 1-Channel (Mono) with Stereo Headphones .In this case, it is an electrical device of type Class AB .In a computer or other communication device, there are 10 pins, which are pronged contacts.The electronic part is positioned in the way of Surface Mount .This electrical device operates at 2.5V~5.5V volts.1 channels are present on the device.During operation, the value Depop, Shutdown can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .The device contains 10 pins.There is a part belonging to Audio/Video Amplifiers .Amp parts is part of the TPA0253 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 2.5V .During this time, the maximum supply voltage (Vsup) reaches 5.5V .There is a supply type of Single for this electronic part.Power supply for this device is 3/5V volts.3.2mA external influences affect the amount of quiescent current consumed by this device.
TPA0253DGQR Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
TPA0253 family
1W kWh per hour
TPA0253DGQR Applications
There are a lot of Texas Instruments TPA0253DGQR audio amplifiers applications.
- Weak signal detection
- Medical imaging
- Integrator and differentiator circuits
- Band-pass filter
- Fast A/D and D/A converters, video amplifiers
- Biopotential
- Communication device
- Power generator
- Industrial control system
- Displayers for aircraft and air transportation control systems