TPA032D03DCA
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT ALSO REQUIRES 8V TO 14V SUPPLY |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5.6W |
| Technology | CMOS |
| Voltage - Supply | 8V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPA032D03 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Output Type | 1-Channel (Mono) with Stereo Headphones |
| Operating Supply Voltage | 12V |
| Supply Voltage-Max (Vsup) | 14V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 1 |
| Nominal Supply Current | 25mA |
| Power Dissipation | 5.6W |
| Quiescent Current | 25mA |
| Output Power | 10W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Gain | 25 dB |
| Max Output Power | 10W |
| Max Output Power x Channels @ Load | 10W x 1 @ 4 Ω; 50mW x 2 @ 32 Ω |
| Harmonic Distortion | 0.5% |
| Height Seated (Max) | 1.2mm |
| Length | 12.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) Exposed Pad |
| Number of Pins | 48 |
| Weight | 210.410161mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Mute, Shutdown, Thermal Protection |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
TPA032D03DCA Overview
I have embedded this device in 48-TFSOP (0.240, 6.10mm Width) Exposed Pad .Amp parts is packaged in the way of Tube .The 48 termination refers to terminating transmission lines with devices that match their characteristic impedance.The output it is configured with uses 1-Channel (Mono) with Stereo Headphones .An electrical device of type Class D is involved.The computer or other communication device has 48 pins, which are pronged contacts.Amp parts is mounted in front of Surface Mount .This electrical device is powered by 8V~14V volts.The number of channels is growing strong/weak: 1 .During operation, the value Depop, Differential Inputs, Mute, Shutdown, Thermal Protection can be ensured.No temperature higher than -40°C~125°C TA should be used for operations.The device is equipped with a total of 48 pins.The item belongs to Audio/Video Amplifiers .This chip is included in the TPA032D03 family.In this case, the electronic part is mounted in the way of Surface Mount .A maximum output power of 10W kWh per hour is possible for this electronic part.As a general rule, the supply voltage (Vsup) should be maintained above 8V .Vsup reaches 14V at the maximum.There is a Single supply type on this electronic part.As long as external factors do not affect it, it consumes 25mA of quiescent current.Amp parts also includes IT ALSO REQUIRES 8V TO 14V SUPPLY .
TPA032D03DCA Features
48-TFSOP (0.240, 6.10mm Width) Exposed Pad package
48 pin count
TPA032D03 family
10W kWh per hour
TPA032D03DCA Applications
There are a lot of Texas Instruments TPA032D03DCA audio amplifiers applications.
- Medical imaging
- Television broadcasting equipment
- Medical instruments
- Integrator and differentiator circuits
- Communication device
- Computer workstations and wireless base stations
- Signal filtering
- single/dual op amp sum and difference circuits
- Fission chambers
- Test equipment
