TPA1517DWPR
| Parameters | |
|---|---|
| Operating Supply Voltage | 15V |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 9.5V |
| Number of Channels | 2 |
| Nominal Supply Current | 70mA |
| Power Dissipation | 2.94W |
| Max Supply Current | 70mA |
| Quiescent Current | 45mA |
| Output Power | 6W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 20dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Gain | 20 dB |
| Max Output Power | 6W |
| Max Output Power x Channels @ Load | 6W x 2 @ 4 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 4Ohm |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Mute, Standby, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.94W |
| Technology | BIPOLAR |
| Voltage - Supply | 9.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA1517 |
| Pin Count | 20 |
| Output Type | 2-Channel (Stereo) |
| Max Output Current | 4A |
TPA1517DWPR Overview
There is a device embedded in 20-SOIC (0.295, 7.50mm Width) Exposed Pad .The chip is recommended to be packaged in Tape & Reel (TR) case. In addition, 20 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Output 2-Channel (Stereo) is configured for this device.This electrical device has the type Class AB .As part of the signal interface in a computer or other communication device, there are 20 pins.This electronic part is mounted in the way of Surface Mount .There is 9.5V~18V voltage supply to this electrical device.There are 2 channels available on the device.Mute, Standby, Thermal Protection can be ensured when operating.Temperatures should not exceed -40°C~85°C TA .This device has 20 pins.This chip belongs to Audio/Video Amplifiers .This item belongs to the family of TPA1517 .According to the manufacturer, the maximum output power of this electronic component is 6W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 9.5V .18V represents the maximal supply voltage (Vsup).In this electronic part, the supply type is Single .Without external influences, it consumes 45mA of quiescent current.This device features maximum design flexibility because it has a maximum output current of 4A .
TPA1517DWPR Features
20-SOIC (0.295, 7.50mm Width) Exposed Pad package
20 pin count
TPA1517 family
6W kWh per hour
TPA1517DWPR Applications
There are a lot of Texas Instruments TPA1517DWPR audio amplifiers applications.
- Band-pass filter
- Medical imaging
- High/low-pass filter circuit
- Power control
- single/dual op amp sum and difference circuits
- Instrumentation
- Automotive sensors
- ECG equipment
- Information processing
- pH (acidity)
