TPA1517NE
| Parameters | |
|---|---|
| Nominal Supply Current | 70mA |
| Power Dissipation | 2.85W |
| Max Supply Current | 70mA |
| Quiescent Current | 45mA |
| Output Power | 6W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 20dB |
| Power Supply Rejection Ratio (PSRR) | 65dB |
| Gain | 20 dB |
| Max Output Power | 6W |
| Max Output Power x Channels @ Load | 6W x 2 @ 4 Ω |
| Harmonic Distortion | 10% |
| Number of Amplifiers | 2 |
| Load Impedance | 4Ohm |
| Height | 5.08mm |
| Length | 24.51mm |
| Width | 6.86mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Mute, Standby, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.85W |
| Technology | BIPOLAR |
| Voltage - Supply | 9.5V~18V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Base Part Number | TPA1517 |
| Pin Count | 20 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 15V |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 9.5V |
| Number of Channels | 2 |
TPA1517NE Overview
The device is embedded in 20-DIP (0.300, 7.62mm) .Amp parts is recommended that the chip be packaged in a Tube case.2-Channel (Stereo) is the output configured for it.The type of this electrical device is Class AB .Computers or other communication devices have 20 pins, which are pronged contacts.A part of this electronic device is mounted in the way of Through Hole .In this electrical device, the supply voltage is 9.5V~18V .2 channels are available on the device.During operation, Mute, Standby, Thermal Protection can be ensured.Ideally, the operating temperature should not exceed -40°C~85°C TA .A total of 20 pins are present on the device.Amp parts is included in Audio/Video Amplifiers .Amp parts is included in the TPA1517 family.There is an electronic component mounted in the way of Through Hole .According to the manufacturer, the maximum output power of this electronic component is 6W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 9.5V to ensure proper operation of the device.During this time, the maximum supply voltage (Vsup) reaches 18V .A Single supply type is used for this electronic part.Amp parts consumes 45mA of quiescent current wAmp partshout being affected by external factors. There are 2 amplifiers, which are electronic devices that increases the voltage, current, or power of a signal.
TPA1517NE Features
20-DIP (0.300, 7.62mm) package
20 pin count
TPA1517 family
6W kWh per hour
TPA1517NE Applications
There are a lot of Texas Instruments TPA1517NE audio amplifiers applications.
- Medical imaging
- Biopotential
- Integrator and differentiator circuits
- Information processing
- Industrial control system
- single/dual op amp sum and difference circuits
- Vehicle electronics
- Weak signal detection
- Medical instruments
- Test and measurement instruments
