TPA2000D1PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 774mW |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA2000 |
| Pin Count | 16 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 6mA |
| Power Dissipation | 774mW |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Output Power | 2W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -77dB |
| Gain | 23.5 dB |
| Max Output Power | 2W |
| Max Output Power x Channels @ Load | 2W x 1 @ 4 Ω |
| Harmonic Distortion | 1% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2000D1PW Overview
A device has been embedded in 16-TSSOP (0.173, 4.40mm Width) .Chips should be packaged in Tube cases.Transmission lines can be terminated with 16 terminations, which have devices that match the line's characteristic impedance.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.The device is of type Class D .Computers or other communication devices have 16 pins, which are pronged contacts.Amp parts is mounted in front of Surface Mount .There is 2.7V~5.5V supply voltage for this electrical device.There are no channels on the device.When operating, it is possible to ensure Depop, Differential Inputs, Short-Circuit Protection, Shutdown .A temperature greater than -40°C~85°C TA should not be used.There are 16 pins present on this device.There is a part belonging to Audio/Video Amplifiers .Amp parts belongs to the TPA2000 family.This electronic part has a maximum output power of 2W kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 2.7V .5.5V is the maximum supply voltage (Vsup).Amp parts is a Single supply type.Without external influences, it consumes 4mA of quiescent current.
TPA2000D1PW Features
16-TSSOP (0.173, 4.40mm Width) package
16 pin count
TPA2000 family
2W kWh per hour
TPA2000D1PW Applications
There are a lot of Texas Instruments TPA2000D1PW audio amplifiers applications.
- Video and image computer boards
- Weak signal detection
- Inverse/same-phase proportional circuit
- Signal transformation
- Signal operation
- Computer workstations and wireless base stations
- Switching amplifier
- pH (acidity)
- Addition and subtraction operation circuits
- High gain DC amplifier
