TPA2005D1DRBQ1
| Parameters | |
|---|---|
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA2005 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 2.7W |
| Quiescent Current | 2.8mA |
| Output Power | 1.4W |
| Common Mode Rejection Ratio | 68 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Max Output Power | 1.45W |
| Max Output Power x Channels @ Load | 1.45W x 1 @ 8 Ω |
| Harmonic Distortion | 10% |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
TPA2005D1DRBQ1 Overview
The device is embedded in 8-VDFN Exposed Pad .This device is packaged in the way of Tape & Reel (TR) .8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts uses 1-Channel (Mono) as Amp partss output.Class D is the type of this electrical device.As part of a signal interface in a computer or other communication device, there are 8 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .Channels 1 are present in the device.Amp parts is possible to operate wAmp partsh Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .No temperature higher than -40°C~85°C TA should be used for operations.There are 8 pins present on this device.As part of Audio/Video Amplifiers , this part is included.This is a member of the TPA2005 family.There is a maximum output power of 1.45W kWh per hour from this electronic component.The supply voltage (Vsup) should be kept above 2.5V for normal operation.The maximum supply voltage (Vsup) is reached at 5.5V .Amp parts is an electronic part wAmp partsh a supply type of Single .The device is powered by a voltage of 3/5V .Amp parts belongs to the series Automotive, AEC-Q100 .The device consumes 2.8mA quiescent current
TPA2005D1DRBQ1 Features
8-VDFN Exposed Pad package
8 pin count
TPA2005 family
1.45W kWh per hour
Automotive, AEC-Q100 series
TPA2005D1DRBQ1 Applications
There are a lot of Texas Instruments TPA2005D1DRBQ1 audio amplifiers applications.
- Power generator
- Vehicle electronics
- Power transmission
- Semiconductor detectors
- single/dual op amp sum and difference circuits
- Professional videography
- Integrator and differentiator circuits
- Television broadcasting equipment
- Proportional operation circuits
- High-frequency data acquisition systems
