TPA2005D1DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA2005 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 2.7W |
| Quiescent Current | 2.8mA |
| Output Power | 1.4W |
| Common Mode Rejection Ratio | 68 dB |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Max Output Power | 1.45W |
| Max Output Power x Channels @ Load | 1.45W x 1 @ 8 Ω |
| Harmonic Distortion | 10% |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2005D1DRBR Overview
8-VDFN Exposed Pad contains an embedded device.The device is in the form of Cut Tape (CT) .1-Channel (Mono) is the output configured for it.The type of this electrical device is Class D .As part of the signal interface in a computer or other communication device, there are 8 pins.Amp parts is mounted in front of Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.There are 1 channels available on the device.When operating, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .The device is equipped with a total of 8 pins.There is a part belonging to Audio/Video Amplifiers .Amp parts is part of the TPA2005 family.An electronic part such as this has a maximum output power of 1.45W kWh per hour.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 2.5V .The maximum supply voltage (Vsup) is reached at 5.5V .There is a Single supply type on this electronic part.The device is powered by a voltage supply of 3/5V volts.As long as external factors do not affect it, it consumes 2.8mA of quiescent current.As of this writing, there are 1 amplifiers, which are electronic devices that increase a signal's voltage, current, or power.
TPA2005D1DRBR Features
8-VDFN Exposed Pad package
8 pin count
TPA2005 family
1.45W kWh per hour
TPA2005D1DRBR Applications
There are a lot of Texas Instruments TPA2005D1DRBR audio amplifiers applications.
- Signal operation
- Portable electronic products powered by batteries
- Video and image computer boards
- Medical instruments
- Addition and subtraction operation circuits
- Vehicle electronics
- Integrator and differentiator circuits
- Information processing
- Automotive sensors
- Band-stop filter
