TPA2006D1DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA2006 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 2.7W |
| Quiescent Current | 3.4mA |
| Output Power | 1.45W |
| Common Mode Rejection Ratio | 68 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Gain | 20 dB |
| Max Output Power | 1.45W |
| Max Output Power x Channels @ Load | 1.45W x 1 @ 8 Ω |
| Load Impedance | 8Ohm |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2006D1DRBR Overview
In 8-VDFN Exposed Pad is embedded this device.The device is in the form of Tape & Reel (TR) .8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .The device belongs to the Class D type of electrical devices.As part of the signal interface in a computer or other communication device, there are 8 pins.A part of this electronic device is mounted in the way of Surface Mount .This electrical device has a supply voltage of 2.5V~5.5V .There are no channels on the device.Operating with Differential Inputs, Shutdown, Thermal Protection is possible.Temperatures should not exceed -40°C~85°C TA .This device has 8 pins.Audio/Video Amplifiers incorporates this part.This is a member of the TPA2006 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1.45W kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.5V .In this case, the maximum supply voltage (Vsup) reaches 5.5V .Single is the type of supply for this electronic part.The device is powered by a voltage of 3/5V volts.There is 3.4mA external influence on the consumption of quiescent current: it consumes 3.4mA of quiescent current.
TPA2006D1DRBR Features
8-VDFN Exposed Pad package
8 pin count
TPA2006 family
1.45W kWh per hour
TPA2006D1DRBR Applications
There are a lot of Texas Instruments TPA2006D1DRBR audio amplifiers applications.
- Power generator
- Oscilloscopes
- Signal filtering
- Fast A/D and D/A converters, video amplifiers
- Computer workstations and wireless base stations
- Scintillation detectors
- pH (acidity)
- Broadcasting
- Proportional operation circuits
- Automotive sensors
