TPA2015D1YZHT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | SpeakerGuard™ |
| JESD-609 Code | e1 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 500mW |
| Voltage - Supply | 2.5V~5.2V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2015 |
| Pin Count | 16 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.2V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.7mA |
| Quiescent Current | 1.7mA |
| Output Power | 2W |
| Voltage Gain | 20dB |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Output Power | 2W |
| Max Output Power x Channels @ Load | 2W x 1 @ 8 Ω |
| Harmonic Distortion | 1% |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 480μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2015D1YZHT Overview
In 16-UFBGA, DSBGA is embedded this device.Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.16 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.An electrical device of type Class D is involved.There are 16 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The electronic part is positioned in the way of Surface Mount .The supply voltage of this electrical device is 2.5V~5.2V .Currently, the device has only 1 channels.Amp parts is possible to operate wAmp partsh Differential Inputs, Short-Circuit and Thermal Protection .During operation, the temperature should not exceed -40°C~85°C TA .A total of 16 pins are present on the device.Amp parts is part of Audio/Video Amplifiers .The TPA2015 family contains this object.The maximal Output Power of this electronic part is 2W kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 2.5V so that the device functions normally.Amp parts reaches 5.2V when the maximum supply voltage (Vsup) is reached.Amp parts is powered by a 3.6V volt power supply.SpeakerGuard? is the series number for this electronic part.There is 1.7mA external influence on the consumption of quiescent current: it consumes 1.7mA of quiescent current.
TPA2015D1YZHT Features
16-UFBGA, DSBGA package
16 pin count
TPA2015 family
2W kWh per hour
SpeakerGuard? series
TPA2015D1YZHT Applications
There are a lot of Texas Instruments TPA2015D1YZHT audio amplifiers applications.
- Fast A/D and D/A converters, video amplifiers
- Portable electronic products powered by batteries
- Television broadcasting equipment
- Medical imaging
- Proportional counter tubes
- Signal transformation
- Band-pass filter
- Oscilloscopes
- Radar
- High speed sample
