TPA2018D1YZFR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | SmartGain™ |
| JESD-609 Code | e1 |
| Feature | Differential Inputs, I2C, Short-Circuit and Thermal Protection, Shutdown, Volume Control |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2018 |
| Pin Count | 9 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 3.6V |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 1.19W |
| Output Power | 3W |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Max Output Power | 3W |
| Max Output Power x Channels @ Load | 3W x 1 @ 4 Ω |
| Height | 625μm |
| Length | 1.75mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2018D1YZFR Overview
The device is embedded in 9-UFBGA, DSBGA .The device is in the form of Tape & Reel (TR) .In 9 terminations, the transmission line is terminated with an impedance-matching device.Output 1-Channel (Mono) is configured for this device.This electrical device is classified as type Class D .In a computer or other communications device, 9 pins are pronged contacts.The chip is mounted by Surface Mount .Amp parts is powered by a voltage of 2.5V~5.5V volts.The chip is equipped with 1 channels.Amp parts is possible to guarantee Differential Inputs, I2C, Short-Circuit and Thermal Protection, Shutdown, Volume Control when operating.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.This device has 9 pins.As part of Audio/Video Amplifiers , this part is included.This is a member of the TPA2018 family.The chip should be mounted in the way of Surface Mount .In this electronic part, the output power is a maximum of 3W kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 2.5V .5.5V represents the maximal supply voltage (Vsup).Power supply for this device is 3/5V volts.This is a member of the SmartGain? series.
TPA2018D1YZFR Features
9-UFBGA, DSBGA package
9 pin count
TPA2018 family
3W kWh per hour
SmartGain? series
TPA2018D1YZFR Applications
There are a lot of Texas Instruments TPA2018D1YZFR audio amplifiers applications.
- pH (acidity)
- Semiconductor detectors
- Oscilloscopes
- Test and measurement instruments
- Vehicle electronics
- Integrator and differentiator circuits
- Weak signal detection
- Communication
- Medical instruments
- Radar
