TPA2032D1YZFR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | NanoFree™ |
| JESD-609 Code | e1 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 480mW |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2032 |
| Pin Count | 9 |
| Output Type | 1-Channel (Mono) |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Nominal Supply Current | 3mA |
| Power Dissipation | 480mW |
| Quiescent Current | 3mA |
| Output Power | 2.75W |
| Common Mode Rejection Ratio | 69 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 6dB |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Gain | 6 dB |
| Max Output Power | 2.75W |
| Max Output Power x Channels @ Load | 2.75W x 1 @ 4 Ω |
| Load Impedance | 4Ohm |
| Height | 625μm |
| Length | 1.75mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
TPA2032D1YZFR Overview
The device is embedded in 9-UFBGA, DSBGA .In this case, it is packaged as Tape & Reel (TR) .9 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.This electrical device is classified as type Class D .Computers or other communication devices have 9 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .This electrical device has a supply voltage of 2.5V~5.5V .There are 1 channels available on the device.Amp parts is possible to operate wAmp partsh Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .A temperature greater than -40°C~85°C TA should not be used.The device is equipped with 9 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is a member of the TPA2032 family.According to the manufacturer, the maximum output power of this electronic component is 2.75W kWh per hour.Single is the type of supply for this electronic part.This is a member of the NanoFree? series.Despite external influences, it consumes 3mA of quiescent current.
TPA2032D1YZFR Features
9-UFBGA, DSBGA package
9 pin count
TPA2032 family
2.75W kWh per hour
NanoFree? series
TPA2032D1YZFR Applications
There are a lot of Texas Instruments TPA2032D1YZFR audio amplifiers applications.
- Test equipment
- Precision measurement
- Medical instruments
- Computer workstations and wireless base stations
- Vehicle electronics
- Video conversion and routing
- Multiplication and division circuits
- Scintillation detectors
- Medical imaging
- Displayers for aircraft and air transportation control systems
