TPA3008D2PHP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 134.490138mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 4.3W |
| Technology | CMOS |
| Voltage - Supply | 8.5V~18V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA3008 |
| Pin Count | 48 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 15V |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 8.5V |
| Number of Channels | 2 |
| Nominal Supply Current | 11mA |
| Power Dissipation | 4.3W |
| Quiescent Current | 11mA |
| Output Power | 10W |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 31.8dB |
| Power Supply Rejection Ratio (PSRR) | 76dB |
| Gain | 31.8 dB |
| Max Output Power | 10W |
| Max Output Power x Channels @ Load | 10W x 2 @ 16 Ω |
| Load Impedance | 8Ohm |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA3008D2PHP Overview
There is a device embedded in 48-PowerTQFP .In this case, it is packaged as Tray .Transmission lines can be terminated with 48 terminations, which have devices that match the line's characteristic impedance.The output it is configured with uses 2-Channel (Stereo) .The device is of type Class D .48 pins are pronged contacts on a computer or other communication device that form a signal interface.This electronic part is mounted in the way of Surface Mount .This electrical device is powered by 8.5V~18V volts.2 channels are provided by the device.Operating with Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown is possible.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .The device contains 48 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is a member of the TPA3008 family.A maximum output power of 10W kWh per hour can be achieved with this electronic part.Amp parts is important to keep the supply voltage (Vsup) above 8.5V so that the device functions normally.The maximal supply voltage (Vsup) reaches 18V .Amp parts is an electronic part wAmp partsh a supply type of Single .Despite external influences, it consumes 11mA of quiescent current.
TPA3008D2PHP Features
48-PowerTQFP package
48 pin count
TPA3008 family
10W kWh per hour
TPA3008D2PHP Applications
There are a lot of Texas Instruments TPA3008D2PHP audio amplifiers applications.
- Power transmission
- Biopotential
- Addition and subtraction operation circuits
- Band-pass filter
- Signal amplification
- Displayers for aircraft and air transportation control systems
- Comparator
- Portable electronic products powered by batteries
- Power control
- Video conversion and routing
