TPA3100D2PHP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 134.490138mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5W |
| Technology | CMOS |
| Voltage - Supply | 10V~26V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPA3100 |
| Pin Count | 48 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 24V |
| Number of Channels | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 5W |
| Output Power | 21.8W |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Nominal Input Voltage | 2V |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Gain | 36 dB |
| Max Dual Supply Voltage | 26V |
| Max Output Power | 21.8W |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 24V |
| Max Output Power x Channels @ Load | 21.8W x 2 @ 8 Ω |
| Number of Amplifiers | 1 |
| Load Impedance | 4Ohm |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA3100D2PHP Overview
The device is embedded in 48-PowerTQFP .The device is in the form of Tray .Amp parts is configured wAmp partsh an output of 2-Channel (Stereo) .The type of this electrical device is Class D .There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. There is an electronic part mounted in the way of Surface Mount .There is 10V~26V voltage supply to this electrical device.Currently, the device has only 2 channels.Operating with Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown is possible.There should be no temperature increase above -40°C~85°C TA .The device is equipped with a total of 48 pins.As part of Audio/Video Amplifiers , this part is included.This is a member of the TPA3100 family.There is a maximum output power of 21.8W kWh per hour from this electronic component.Amp parts is an electronic part wAmp partsh a supply type of Single .There are 1 amplifiers, which are electronic devices that increases the voltage, current, or power of a signal. The frequency of the device is 300kHz .
TPA3100D2PHP Features
48-PowerTQFP package
48 pin count
TPA3100 family
21.8W kWh per hour
the frequency of 300kHz
TPA3100D2PHP Applications
There are a lot of Texas Instruments TPA3100D2PHP audio amplifiers applications.
- Comparator
- Precision measurement
- single/dual op amp sum and difference circuits
- Portable electronic products powered by batteries
- Weak signal detection
- Radar
- High input resistance broadband
- ECG equipment
- Medical imaging
- Biopotential
