TPA3100D2PHPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-PowerTQFP |
| Number of Pins | 48 |
| Weight | 134.490138mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5W |
| Technology | CMOS |
| Voltage - Supply | 10V~26V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA3100 |
| Pin Count | 48 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 24V |
| Number of Channels | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 5W |
| Output Power | 21.8W |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Gain | 36 dB |
| Max Dual Supply Voltage | 26V |
| Max Output Power | 21.8W |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 24V |
| Max Output Power x Channels @ Load | 21.8W x 2 @ 8 Ω |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA3100D2PHPG4 Overview
48-PowerTQFP contains an embedded device.Chips should be packaged in Tray cases.48 terminations consist of terminating transmission lines with devices that match their characteristic impedance.The output it is configured with uses 2-Channel (Stereo) .In this case, it is an electrical device of type Class D .There are 48 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The chip is mounted by Surface Mount .This electrical device has a supply voltage of 10V~26V .Amp parts is equipped wAmp partsh 2 channels.Ensure that Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown is maintained when operating.No temperature higher than -40°C~85°C TA should be used for operations.The device contains 48 pins.There is a part belonging to Audio/Video Amplifiers .Amp parts belongs to TPA3100 family.Amp parts is recommended to mount the chip in the way of Surface Mount .This electronic part has a maximum output power of 21.8W kWh per hour.Single is the type of supply for this electronic part.
TPA3100D2PHPG4 Features
48-PowerTQFP package
48 pin count
TPA3100 family
21.8W kWh per hour
TPA3100D2PHPG4 Applications
There are a lot of Texas Instruments TPA3100D2PHPG4 audio amplifiers applications.
- High/low-pass filter circuit
- Communication
- Band-pass filter
- Computer workstations and wireless base stations
- Communication device
- Power generator
- Medical imaging
- Addition and subtraction operation circuits
- Video and image computer boards
- Multiplication and division circuits
