TPA3100D2PHPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-PowerTQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Weight | 134.490138mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5W |
| Technology | CMOS |
| Voltage - Supply | 10V~26V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA3100 |
| Pin Count | 48 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 24V |
| Number of Channels | 2 |
| Nominal Supply Current | 18mA |
| Power Dissipation | 5W |
| Quiescent Current | 180μA |
| Output Power | 21.8W |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 36dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Gain | 36 dB |
| Max Dual Supply Voltage | 26V |
| Max Output Power | 21.8W |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 24V |
| Max Output Power x Channels @ Load | 21.8W x 2 @ 8 Ω |
| Load Impedance | 4Ohm |
| Height | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA3100D2PHPR Overview
In the 48-PowerTQFP package, it is embedded.This device is packaged in the way of Tape & Reel (TR) .As a consequence, there are 48 terminations, which involve ending a transmission line with a device matching the characteristic impedance of the line.Currently, amp parts is configured wAmp partsh 2-Channel (Stereo) as the output.In this case, it is an electrical device of type Class D .The 48 pins are pronged contacts which are part of a signal interface in a computer or other communication device.The electronic component is mounted in the way of Surface Mount .This electrical device has a supply voltage of 10V~26V .This device is equipped with a total of 2 channels.The operation of Differential Inputs, Mute, Short-Circuit and Thermal Protection, Shutdown can be ensured.A maximum operating temperature of -40°C~85°C TA should be maintained.The device is equipped with 48 pins.As part of Audio/Video Amplifiers , this part is included.This item belongs to the family of TPA3100 .According to the manufacturer, the maximum output power of this electronic component is 21.8W kWh per hour.There is a Single supply type on this electronic part.180μA external influences affect the amount of quiescent current consumed by this device.
TPA3100D2PHPR Features
48-PowerTQFP package
48 pin count
TPA3100 family
21.8W kWh per hour
TPA3100D2PHPR Applications
There are a lot of Texas Instruments TPA3100D2PHPR audio amplifiers applications.
- Portable electronic products powered by batteries
- Professional videography
- Communication
- Multiplication and division circuits
- Power control
- Vehicle electronics
- Scintillation detectors
- Comparator
- Television broadcasting equipment
- Displayers for aircraft and air transportation control systems
