TPA3110D2PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | SpeakerGuard™ |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 4.48W |
| Technology | CMOS |
| Voltage - Supply | 8V~26V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA3110 |
| Pin Count | 28 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 15V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Nominal Supply Current | 32mA |
| Power Dissipation | 4.48W |
| Output Power | 15W |
| Supply Type | Single |
| Bandwidth | 22 kHz |
| Voltage Gain | 36dB |
| Gain | 36 dB |
| Max Output Power | 15W |
| Max Output Power x Channels @ Load | 15W x 2 @ 8 Ω |
| Load Impedance | 4Ohm |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA3110D2PWP Overview
The package 28-PowerTSSOP (0.173, 4.40mm Width) contains it.Tube is the packaging method.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 28 termination.In the configuration, 2-Channel (Stereo) is used as the output.Amp parts is an electrical device of type Class D .28 pins are pronged contacts on a computer or other communication device that form a signal interface.This electronic part is mounted in the way of Surface Mount .Amp parts is powered by a voltage of 8V~26V volts.Amp parts is equipped wAmp partsh 2 channels.Amp parts is possible to operate wAmp partsh Differential Inputs, Short-Circuit and Thermal Protection, Shutdown .A maximum operating temperature of -40°C~85°C TA should be maintained.In addition, it is equipped with 28 pins.The part belongs to Audio/Video Amplifiers .The TPA3110 family contains this object.As of this moment, the maximum Output Power of this electronic part is 15W kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 8V so that the device functions normally.In this electronic part, the supply type is Single .SpeakerGuard? is the series number for this electronic part.
TPA3110D2PWP Features
28-PowerTSSOP (0.173, 4.40mm Width) package
28 pin count
TPA3110 family
15W kWh per hour
SpeakerGuard? series
TPA3110D2PWP Applications
There are a lot of Texas Instruments TPA3110D2PWP audio amplifiers applications.
- Comparator
- Television broadcasting equipment
- Radar
- High-frequency data acquisition systems
- Power transmission
- Broadcasting
- Vehicle electronics
- Addition and subtraction operation circuits
- Medical imaging
- ECG equipment
