TPA4411RTJT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 38.101759mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | DirectPath™ |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 3.45W |
| Voltage - Supply | 1.8V~4.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA4411 |
| Pin Count | 20 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 4.5V |
| Power Supplies | 1.8/4.5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Number of Channels | 2 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 5.2W |
| Max Supply Current | 10mA |
| Quiescent Current | 8mA |
| Output Power | 80mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 63.52dB |
| Power Supply Rejection Ratio (PSRR) | -80dB |
| Gain | 63.52 dB |
| Max Output Power | 100mW |
| Max Output Power x Channels @ Load | 100mW x 2 @ 16 Ω |
| Harmonic Distortion | 1% |
| Load Impedance | 16Ohm |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA4411RTJT Overview
The device is embedded in 20-WFQFN Exposed Pad .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 20 termination.The output it is configured with uses Headphones, 2-Channel (Stereo) .There is Class AB type of electrical device associated with this device.20 pins are pronged contacts on a computer or other communication device that form a signal interface.In this case, the electronic part is mounted in the way of Surface Mount .There is 1.8V~4.5V supply voltage for this electrical device.2 channels are available on the device.The operation of Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.No temperature higher than -40°C~85°C TA should be used for operations.A total of 20 pins are present in it.Amp parts is part of Audio/Video Amplifiers .The TPA4411 family contains this object.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 100mW kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 1.8V .4.5V is reached as the maximal supply voltage (Vsup).Supply type Single is assigned to this electronic part.Power is supplied by a 1.8/4.5V volt source.This is a member of the DirectPath? series.Amp parts consumes a quiescent current of 8mA .
TPA4411RTJT Features
20-WFQFN Exposed Pad package
20 pin count
TPA4411 family
100mW kWh per hour
DirectPath? series
TPA4411RTJT Applications
There are a lot of Texas Instruments TPA4411RTJT audio amplifiers applications.
- High/low-pass filter circuit
- single/dual op amp sum and difference circuits
- Comparator
- Television broadcasting equipment
- Medical instruments
- ECG equipment
- Test and measurement instruments
- Band-stop filter
- Signal operation
- Signal filtering
