TPA4860D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Mute, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 1.25W |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA4860 |
| Pin Count | 16 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 1.25W |
| Quiescent Current | 3.5mA |
| Output Power | 1W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.5MHz |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 1.1W |
| Max Output Power x Channels @ Load | 1.1W x 1 @ 8 Ω |
| Harmonic Distortion | 2% |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA4860D Overview
In the 16-SOIC (0.154, 3.90mm Width) package, it is embedded.This device is packaged in the way of Tube .In addition, there are 16 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.In the configuration, 1-Channel (Mono) is used as the output.This electrical device is classified as type Class AB .As part of a signal interface in a computer or other communication device, there are 16 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .This electrical device has a 2.7V~5.5V supply voltage.The chip is equipped with 1 channels.During operation, Mute, Short-Circuit and Thermal Protection, Shutdown can be ensured.No temperature higher than -40°C~85°C TA should be used for operations.In addition, it is equipped with 16 pins.There is a part belonging to Audio/Video Amplifiers .Amp parts is included in the TPA4860 family.This electronic part has a maximum output power of 1.1W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.7V to ensure proper operation of the device.5.5V is the maximum supply voltage (Vsup).Amp parts is a Single supply type.There is 3.5mA external influence on the consumption of quiescent current: it consumes 3.5mA of quiescent current.
TPA4860D Features
16-SOIC (0.154, 3.90mm Width) package
16 pin count
TPA4860 family
1.1W kWh per hour
TPA4860D Applications
There are a lot of Texas Instruments TPA4860D audio amplifiers applications.
- Proportional counter tubes
- Displayers for aircraft and air transportation control systems
- Communication device
- Professional videography
- Video conversion and routing
- Weak signal detection
- Multiplication and division circuits
- Logarithmic and exponential operation circuits
- Fast A/D and D/A converters, video amplifiers
- Semiconductor detectors
