TPA4861D
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA4861 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Operating Supply Current | 3.5mA |
| Nominal Supply Current | 3.5mA |
| Power Dissipation | 725mW |
| Quiescent Current | 3.5mA |
| Output Power | 1W |
| Supply Type | Single |
| Bandwidth | 1.5MHz |
| Gain Bandwidth Product | 1.5MHz |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 1.1W |
| Max Output Power x Channels @ Load | 1.1W x 1 @ 8 Ω |
| Harmonic Distortion | 2% |
| Load Impedance | 8Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
TPA4861D Overview
The device is embedded in 8-SOIC (0.154, 3.90mm Width) .There is a package in the form of Tube .The 8 termination refers to terminating transmission lines with devices that match their characteristic impedance.The output it is configured with uses 1-Channel (Mono) .Amp parts is an electrical device of type Class AB .There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. This electronic part is mounted in the way of Surface Mount .In this electrical device, the supply voltage is 2.7V~5.5V .This device is equipped with a total of 1 channels.Amp parts is possible to operate wAmp partsh Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA °C.There are 8 pins on this device.This chip belongs to Audio/Video Amplifiers .The TPA4861 family includes it.A maximum output power of 1.1W kWh per hour can be achieved with this electronic part.The supply voltage (Vsup) should be kept above 2.7V for normal operation.5.5V is the maximum supply voltage (Vsup).A Single supply type is used for this electronic part.Despite external influences, it consumes 3.5mA of quiescent current.
TPA4861D Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA4861 family
1.1W kWh per hour
TPA4861D Applications
There are a lot of Texas Instruments TPA4861D audio amplifiers applications.
- Automation control systems
- High input resistance broadband
- Test equipment
- ECG equipment
- Multiplication and division circuits
- Fast A/D and D/A converters, video amplifiers
- Automotive sensors
- High gain DC amplifier
- Communication
- Active probe
