TPA6017A2PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6017 |
| Pin Count | 20 |
| Output Type | 2-Channel (Stereo) |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 2.7W |
| Max Supply Current | 10mA |
| Quiescent Current | 6mA |
| Output Power | 2W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Max Output Power | 2W |
| Max Output Power x Channels @ Load | 2W x 2 @ 3 Ω |
| Harmonic Distortion | 1% |
| Load Impedance | 3Ohm |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6017A2PWPR Overview
The device is embedded in 20-PowerTSSOP (0.173, 4.40mm Width) .Amp parts is packaged in the way of Cut Tape (CT) .Transmission lines can be terminated with 20 terminations, which have devices that match the line's characteristic impedance.Currently, amp parts is configured wAmp partsh 2-Channel (Stereo) as the output.In terms of electrical devices, it belongs to the type Class AB .As part of a signal interface in a computer or other communication device, there are 20 pins, which are pronged contacts.The electronic component is mounted in the way of Surface Mount .This electrical device has a 4.5V~5.5V supply voltage.Channels 2 are present in the device.Depop, Differential Inputs, Shutdown can be ensured when operating.Ideally, the operating temperature should not exceed -40°C~85°C TA .There are 20 pins present on this device.Amp parts is included in Audio/Video Amplifiers .Amp parts belongs to the TPA6017 family.According to the manufacturer, the maximum output power of this electronic component is 2W kWh per hour.There is a Single supply type on this electronic part.Amp parts is powered by a 5V volt power supply.Amp parts consumes a quiescent current of 6mA .
TPA6017A2PWPR Features
20-PowerTSSOP (0.173, 4.40mm Width) package
20 pin count
TPA6017 family
2W kWh per hour
TPA6017A2PWPR Applications
There are a lot of Texas Instruments TPA6017A2PWPR audio amplifiers applications.
- Comparator
- Medical instruments
- Fission chambers
- pH (acidity)
- High-frequency data acquisition systems
- Computer workstations and wireless base stations
- Switching amplifier
- High gain DC amplifier
- Communication
- Vehicle electronics
