Parameters |
Quiescent Current |
750μA |
Output Power |
50mW |
Supply Type |
Single |
Bandwidth |
20 kHz |
Power Supply Rejection Ratio (PSRR) |
72dB |
Max Output Power |
50mW |
Max Output Power x Channels @ Load |
50mW x 2 @ 16 Ω |
Harmonic Distortion |
0.1% |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Depop, Short-Circuit and Thermal Protection, Shutdown |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
710mW |
Technology |
CMOS |
Voltage - Supply |
1.6V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Base Part Number |
TPA6100 |
Pin Count |
8 |
Output Type |
Headphones, 2-Channel (Stereo) |
Operating Supply Voltage |
3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
1.6V |
Number of Channels |
2 |
Nominal Supply Current |
2mA |
Power Dissipation |
710mW |
TPA6100A2DR Overview
The device is embedded in 8-SOIC (0.154, 3.90mm Width) .Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .In addition, 8 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Output Headphones, 2-Channel (Stereo) is configured for this device.In this case, it is an electrical device of type Class AB .In a computer or other communication device, there are two pronged contacts called 8 pins.Amp parts is mounted in the way of Surface Mount .Amp parts is powered by a voltage of 1.6V~3.6V volts.The chip is equipped with 2 channels.During operation, the value Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.The operating temperature should not exceed -40°C~85°C TA °C.The device is equipped with a total of 8 pins.Audio/Video Amplifiers incorporates this part.The TPA6100 family contains this object.According to the manufacturer, the maximum output power of this electronic component is 50mW kWh per hour.Amp parts is important to keep the supply voltage (Vsup) above 1.6V so that the device functions normally.Amp parts reaches 3.6V when the maximum supply voltage (Vsup) is reached.Single is the type of supply for this electronic part.There is 750μA external influence on the consumption of quiescent current: it consumes 750μA of quiescent current.
TPA6100A2DR Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA6100 family
50mW kWh per hour
TPA6100A2DR Applications
There are a lot of Texas Instruments TPA6100A2DR audio amplifiers applications.
- Logarithmic and exponential operation circuits
- Biopotential
- pH (acidity)
- Signal filtering
- Signal transformation
- High speed sample
- Multiplication and division circuits
- Vehicle electronics
- High/low-pass filter circuit
- Information processing