TPA6101A2D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 710mW |
| Technology | CMOS |
| Voltage - Supply | 1.6V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA6101 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Number of Channels | 2 |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 710mW |
| Quiescent Current | 750μA |
| Output Power | 50mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 2dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Gain | 2 dB |
| Max Output Power | 50mW |
| Max Output Power x Channels @ Load | 50mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Load Impedance | 16Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6101A2D Overview
The device is embedded in 8-SOIC (0.154, 3.90mm Width) .Ideally, the chip should be packaged in a Tube case.In 8 terminations, a transmission line is terminated with a device that matches its characteristic impedance.Currently, amp parts is configured wAmp partsh Headphones, 2-Channel (Stereo) as the output.The device belongs to the Class AB type of electrical devices.The 8 pins are pronged contacts which are part of a signal interface in a computer or other communication device.A part of this electronic device is mounted in the way of Surface Mount .This electrical device has a supply voltage of 1.6V~3.6V .2 channels are present on the device.Amp parts is possible to guarantee Depop, Short-Circuit and Thermal Protection, Shutdown when operating.There should be no temperature increase above -40°C~85°C TA .The device contains 8 pins.Audio/Video Amplifiers contains it.Amp parts belongs to TPA6101 family.In this electronic part, the output power is a maximum of 50mW kWh per hour.As a general rule, the supply voltage (Vsup) should be maintained above 1.6V .During this time, the maximum supply voltage (Vsup) reaches 3.6V volts.There is a Single supply type on this electronic part.The device consumes 750μA quiescent current and is unaffected by external influences.
TPA6101A2D Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA6101 family
50mW kWh per hour
TPA6101A2D Applications
There are a lot of Texas Instruments TPA6101A2D audio amplifiers applications.
- Oscilloscopes
- Radar
- Television broadcasting equipment
- High-frequency data acquisition systems
- Signal filtering
- Weak signal detection
- Medical imaging
- Proportional operation circuits
- Automation control systems
- Broadcasting
