TPA6102A2D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 710mW |
| Technology | CMOS |
| Voltage - Supply | 1.6V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA6102 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Number of Channels | 2 |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 710mW |
| Quiescent Current | 750μA |
| Output Power | 50mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 14dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Gain | 14 dB |
| Max Output Power | 50mW |
| Max Output Power x Channels @ Load | 50mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Load Impedance | 16Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6102A2D Overview
I have embedded this device in 8-SOIC (0.154, 3.90mm Width) .Tube is the packaging method.8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts uses Headphones, 2-Channel (Stereo) as Amp partss output.An electrical device of type Class AB is involved.As part of the signal interface in a computer or other communication device, there are 8 pins.In this case, the electronic part is mounted in the way of Surface Mount .There is 1.6V~3.6V voltage supply to this electrical device.2 channels are available on the device.Amp parts is possible to guarantee Depop, Short-Circuit and Thermal Protection, Shutdown when operating.During operation, the temperature should not exceed -40°C~85°C TA .There are 8 pins on this device.This chip belongs to Audio/Video Amplifiers .The TPA6102 family includes it.An electronic part such as this has a maximum output power of 50mW kWh per hour.The supply voltage (Vsup) should be kept above 1.6V for normal operation.During this time, the maximum supply voltage (Vsup) reaches 3.6V volts.Single is the type of supply for this electronic part.As long as external factors do not affect it, it consumes 750μA of quiescent current.
TPA6102A2D Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA6102 family
50mW kWh per hour
TPA6102A2D Applications
There are a lot of Texas Instruments TPA6102A2D audio amplifiers applications.
- single/dual op amp sum and difference circuits
- Communication
- Weak signal detection
- Band-stop filter
- Radar
- Computer workstations and wireless base stations
- Band-pass filter
- pH (acidity)
- ECG equipment
- Switching amplifier
