TPA6110A2DGN
| Parameters | |
|---|---|
| Max Output Power x Channels @ Load | 150mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6110 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 3mA |
| Quiescent Current | 1.5mA |
| Output Power | 150mW |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 83dB |
| Max Output Power | 150mW |
TPA6110A2DGN Overview
Amp parts is embedded in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package.Amp parts is recommended that the chip be packaged in the case Tube .8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.The output it is configured with uses Headphones, 2-Channel (Stereo) .Class AB is the type of this electrical device.As part of a signal interface in a computer or other communication device, there are 8 pins, which are pronged contacts.There is an electronic part mounted in the way of Surface Mount .Its supply voltage is 2.5V~5.5V volts.This device is equipped with a total of 2 channels.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA .Amp parts is equipped wAmp partsh 8 pin count.Amp parts is included in Audio/Video Amplifiers .This chip is included in the TPA6110 family.As of this moment, the maximum Output Power of this electronic part is 150mW kWh per hour.5.5V is reached as the maximal supply voltage (Vsup).Single is the type of supply for this electronic part.Despite external influences, it consumes 1.5mA of quiescent current.
TPA6110A2DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6110 family
150mW kWh per hour
TPA6110A2DGN Applications
There are a lot of Texas Instruments TPA6110A2DGN audio amplifiers applications.
- Weak signal detection
- High input resistance broadband
- Logarithmic and exponential operation circuits
- Multiplication and division circuits
- Broadcasting
- High speed sample
- Addition and subtraction operation circuits
- Signal operation
- Test equipment
- Signal transformation
