TPA6111A2DGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6111 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3.2mA |
| Power Dissipation | 2.14W |
| Output Power | 150mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Max Output Power | 150mW |
| Max Output Power x Channels @ Load | 150mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6111A2DGNG4 Overview
In 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad is embedded this device.Chips should be packaged in Tube cases.Transmission lines can be terminated with 8 terminations, which have devices that match the line's characteristic impedance.Headphones, 2-Channel (Stereo) is the output configured for it.In this case, it is an electrical device of type Class AB .There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The chip is mounted by Surface Mount .This electrical device is powered by 2.5V~5.5V volts.The chip is equipped with 2 channels.Ensure that Depop, Short-Circuit and Thermal Protection, Shutdown is maintained when operating.A temperature greater than -40°C~85°C TA should not be used.A total of 8 pins are present on the device.This chip belongs to Audio/Video Amplifiers .Amp parts is part of the TPA6111 family.This electronic component's maximum output power is 150mW kWh per hour.During this time, the maximum supply voltage (Vsup) reaches 5.5V .This electronic part has a Single supply type.As a result, it operates on a 3.3/5V volt power supply.
TPA6111A2DGNG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6111 family
150mW kWh per hour
TPA6111A2DGNG4 Applications
There are a lot of Texas Instruments TPA6111A2DGNG4 audio amplifiers applications.
- Automotive sensors
- Band-pass filter
- Proportional counter tubes
- single/dual op amp sum and difference circuits
- Power control
- Communication device
- Industrial control system
- Instrumentation
- Precision measurement
- Video and image computer boards
