TPA6135A2RTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | DirectPath™ |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.567W |
| Voltage - Supply | 2.3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA6135 |
| Pin Count | 16 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 5V |
| Number of Channels | 2 |
| Nominal Supply Current | 2.2mA |
| Power Dissipation | 2.567W |
| Output Power | 25mW |
| Common Mode Rejection Ratio | 100 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 20 kHz |
| Voltage Gain | 6.02dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Gain | 6.02 dB |
| Max Output Power | 25mW |
| Max Output Power x Channels @ Load | 25mW x 2 @ 16 Ω |
| Harmonic Distortion | 1% |
| Load Impedance | 16Ohm |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPA6135A2RTET Overview
Amp parts is embedded in the 16-WFQFN Exposed Pad package.Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.In 16 terminations, the transmission line is terminated with an impedance-matching device.The output it is configured with uses Headphones, 2-Channel (Stereo) .There is Class AB type of electrical device associated with this device.The 16 pins are pronged contacts which are part of a signal interface in a computer or other communication device.The chip is mounted by Surface Mount .Electrical devices like this one have a 2.3V~5.5V supply voltage.2 channels are available on the device.During operation, Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.A total of 16 pins are present on the device.The item belongs to Audio/Video Amplifiers .This is a member of the TPA6135 family.An electronic part such as this has a maximum output power of 25mW kWh per hour.Amp parts is an electronic part wAmp partsh a supply type of Single .Amp parts is a part of the DirectPath? series.
TPA6135A2RTET Features
16-WFQFN Exposed Pad package
16 pin count
TPA6135 family
25mW kWh per hour
DirectPath? series
TPA6135A2RTET Applications
There are a lot of Texas Instruments TPA6135A2RTET audio amplifiers applications.
- Computer workstations and wireless base stations
- Signal operation
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- High/low-pass filter circuit
- High gain DC amplifier
- Industrial control system
- Multiplication and division circuits
- ECG equipment
- Test equipment
