TPA6204A1DRB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6204 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 6mA |
| Power Dissipation | 2.7W |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Output Power | 1.7W |
| Common Mode Rejection Ratio | 63 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -80dB |
| Max Output Power | 1.7W |
| Max Output Power x Channels @ Load | 1.7W x 1 @ 8 Ω |
| Load Impedance | 8Ohm |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6204A1DRB Overview
A device has been embedded in 8-VDFN Exposed Pad .Ideally, the chip should be packaged in a Tube case.In addition, 8 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Output 1-Channel (Mono) is configured for this device.This electrical device is classified as type Class AB .In a computer or other communication device, there are two pronged contacts called 8 pins.In this case, the electronic part is mounted in the way of Surface Mount .There is 2.5V~5.5V voltage supply to this electrical device.Currently, the device has only 1 channels.Ensure that Depop, Differential Inputs, Shutdown, Thermal Protection is maintained when operating.Temperatures should not exceed -40°C~85°C TA .The device contains 8 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is a member of the family TPA6204 .This electronic part has a maximum output power of 1.7W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be maintained above 2.5V for normal operation.Vsup reaches 5.5V at the maximum.In this electronic part, the supply type is Single .The system is powered by a 3/5V battery.Despite being unaffected by external factors, it consumes 4mA of quiescent current.
TPA6204A1DRB Features
8-VDFN Exposed Pad package
8 pin count
TPA6204 family
1.7W kWh per hour
TPA6204A1DRB Applications
There are a lot of Texas Instruments TPA6204A1DRB audio amplifiers applications.
- Signal amplification
- Precision measurement
- Semiconductor detectors
- Displayers for aircraft and air transportation control systems
- ECG equipment
- Communication
- Proportional operation circuits
- Fast A/D and D/A converters, video amplifiers
- Medical imaging
- Power generator
