Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
18.99418mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Depop, Differential Inputs, Shutdown, Thermal Protection |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
2.13W |
Technology |
CMOS |
Voltage - Supply |
2.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Base Part Number |
TPA6205 |
Pin Count |
8 |
Output Type |
1-Channel (Mono) |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Supply Voltage-Min (Vsup) |
2.5V |
Number of Channels |
1 |
Nominal Supply Current |
2mA |
Power Dissipation |
2.13W |
Max Supply Current |
2mA |
Quiescent Current |
1.7mA |
Output Power |
1.25W |
Common Mode Rejection Ratio |
55 dB |
Supply Type |
Single |
Bandwidth |
20 kHz |
Power Supply Rejection Ratio (PSRR) |
-90dB |
Max Output Power |
1.25W |
Max Output Power x Channels @ Load |
1.25W x 1 @ 8 Ω |
Harmonic Distortion |
1% |
Load Impedance |
8Ohm |
Height |
1.1mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPA6205A1DGN Overview
I have embedded this device in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in a Tube case.Transmission lines can be terminated with 8 terminations, which have devices that match the line's characteristic impedance.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .The device belongs to the Class AB type of electrical devices.8 pins are pronged contacts on a computer or other communication device that form a signal interface.In this case, the electronic part is mounted in the way of Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.This device is equipped with a total of 1 channels.During operation, Depop, Differential Inputs, Shutdown, Thermal Protection can be ensured.Temperatures should not exceed -40°C~85°C TA .There are 8 pins on this device.Audio/Video Amplifiers incorporates this part.Amp parts is a member of the family TPA6205 .As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1.25W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.During this time, the maximum supply voltage (Vsup) reaches 5.5V .Electronic parts with Single supply types are available.The device is powered by a voltage of 3/5V volts.Amp parts consumes a quiescent current of 1.7mA .
TPA6205A1DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6205 family
1.25W kWh per hour
TPA6205A1DGN Applications
There are a lot of Texas Instruments TPA6205A1DGN audio amplifiers applications.
- Signal operation
- Signal amplification
- Computer workstations and wireless base stations
- Precision measurement
- Multiplication and division circuits
- Integrator and differentiator circuits
- Switching amplifier
- Active probe
- Weak signal detection
- Biopotential