Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-VDFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
22.906415mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Depop, Differential Inputs, Shutdown, Thermal Protection |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Class AB |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Audio/Video Amplifiers |
Max Power Dissipation |
2.7W |
Technology |
CMOS |
Voltage - Supply |
2.5V~5.5V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Terminal Pitch |
0.65mm |
Base Part Number |
TPA6205 |
Pin Count |
8 |
Output Type |
1-Channel (Mono) |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Supply Voltage-Min (Vsup) |
2.5V |
Number of Channels |
1 |
Nominal Supply Current |
2mA |
Power Dissipation |
2.7W |
Quiescent Current |
1.7mA |
Output Power |
1.25W |
Common Mode Rejection Ratio |
55 dB |
Supply Type |
Single |
Bandwidth |
20 kHz |
Power Supply Rejection Ratio (PSRR) |
-90dB |
Max Output Power |
1.25W |
Max Output Power x Channels @ Load |
1.25W x 1 @ 8 Ω |
Harmonic Distortion |
1% |
Height |
1mm |
Length |
3mm |
Width |
3mm |
Thickness |
880μm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPA6205A1DRBT Overview
The device is embedded in 8-VDFN Exposed Pad .Ideally, the chip should be packaged in a Tape & Reel (TR) case.In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.This electrical device has the type Class AB .As part of the signal interface in a computer or other communication device, there are 8 pins.Amp parts is mounted in front of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.Currently, the device has only 1 channels.When operating, Depop, Differential Inputs, Shutdown, Thermal Protection can be ensured.Ideally, the operating temperature should not exceed -40°C~85°C TA .This device has 8 pins.This chip belongs to Audio/Video Amplifiers .Amp parts is a member of the family TPA6205 .This electronic part has a maximum output power of 1.25W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.The maximum supply voltage (Vsup) is reached at 5.5V .Electronic parts with Single supply types are available.The system is powered by a 3/5V battery.Amp parts consumes a quiescent current of 1.7mA .
TPA6205A1DRBT Features
8-VDFN Exposed Pad package
8 pin count
TPA6205 family
1.25W kWh per hour
TPA6205A1DRBT Applications
There are a lot of Texas Instruments TPA6205A1DRBT audio amplifiers applications.
- Proportional counter tubes
- Medical instruments
- Proportional operation circuits
- Instrumentation
- Television broadcasting equipment
- Portable electronic products powered by batteries
- High input resistance broadband
- single/dual op amp sum and difference circuits
- Radar
- Vehicle electronics