TPA701DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA701 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.25mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 4 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA701DGNR Overview
I have embedded this device in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .The chip is recommended to be packaged in Tape & Reel (TR) case. In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.1-Channel (Mono) is the output configured for it.An electrical device of type Class AB is involved.In a computer or other communication device, there are two pronged contacts called 8 pins.Electronic parts are mounted in the way of Surface Mount .This electrical device has a 2.5V~5.5V supply voltage.Channels 1 are present in the device.Ensure that Short-Circuit and Thermal Protection, Shutdown is maintained when operating.There should be no temperature increase above -40°C~85°C TA .A total of 8 pins are present in it.Amp parts is included in Audio/Video Amplifiers .Amp parts belongs to TPA701 family.A maximum output power of 700mW kWh per hour can be achieved with this electronic part.The supply voltage (Vsup) should be kept above 2.5V for normal operation.5.5V represents the maximal supply voltage (Vsup).There is a Single supply type on this electronic part.As long as external factors do not affect it, it consumes 1.25mA of quiescent current.
TPA701DGNR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA701 family
700mW kWh per hour
TPA701DGNR Applications
There are a lot of Texas Instruments TPA701DGNR audio amplifiers applications.
- High input resistance broadband
- Scintillation detectors
- High-frequency data acquisition systems
- Integrator and differentiator circuits
- Test and measurement instruments
- Automation control systems
- Inverse/same-phase proportional circuit
- Band-pass filter
- Broadcasting
- Video conversion and routing
