TPA711D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA711 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 725mW |
| Quiescent Current | 1.25mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 4 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.3% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA711D Overview
A device has been embedded in 8-SOIC (0.154, 3.90mm Width) .Ideally, the chip should be packaged in a Tube case.As a consequence, there are 8 terminations, which involve ending a transmission line with a device matching the characteristic impedance of the line.1-Channel (Mono) is the output configured for it.There is Class AB type of electrical device associated with this device.The computer or other communication device has 8 pins, which are pronged contacts.There is an electronic part mounted in the way of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .1 channels are present on the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .The operating temperature should not exceed -40°C~85°C TA .There are 8 pins present on this device.This part is included in Audio/Video Amplifiers .This is a member of the TPA711 family.The electronic component is mounted in the way of Surface Mount .An electronic part such as this has a maximum output power of 700mW kWh per hour.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 2.5V .In this case, the maximum supply voltage (Vsup) reaches 5.5V .Electronic parts with Single supply types are available.As a result, it operates on a 3.3/5V volt power supply.1.25mA external influences affect the amount of quiescent current consumed by this device.
TPA711D Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA711 family
700mW kWh per hour
TPA711D Applications
There are a lot of Texas Instruments TPA711D audio amplifiers applications.
- High input resistance broadband
- Scintillation detectors
- Signal amplification
- Addition and subtraction operation circuits
- ECG equipment
- Displayers for aircraft and air transportation control systems
- Professional videography
- Signal filtering
- Proportional counter tubes
- High-frequency data acquisition systems
