banner_page

TPA711DGNR

2.5mA mA4 kHz kHz700mW WAudio Amplifiers1.1mm mm3mm mm2.14W W5.5V V8 pins8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPA711DGNR
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 259
  • Description: 2.5mA mA4 kHz kHz700mW WAudio Amplifiers1.1mm mm3mm mm2.14W W5.5V V8 pins8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number TPA711
Pin Count 8
Output Type 1-Channel (Mono)
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Nominal Supply Current 2.5mA
Power Dissipation 2.14W
Quiescent Current 1.25mA
Output Power 700mW
Supply Type Single
Bandwidth 4 kHz
Gain Bandwidth Product 1.4MHz
Power Supply Rejection Ratio (PSRR) 85dB
Max Output Power 700mW
Max Output Power x Channels @ Load 700mW x 1 @ 8 Ω
Harmonic Distortion 0.3%
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Weight 18.99418mg
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
JESD-609 Code e4
Feature Depop, Short-Circuit and Thermal Protection, Shutdown
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Class AB
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Audio/Video Amplifiers
Max Power Dissipation 2.14W
Technology CMOS
Voltage - Supply 2.5V~5.5V
Terminal Position DUAL

TPA711DGNR Overview


8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad contains an embedded device.The device is in the form of Cut Tape (CT) .In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Amp parts uses 1-Channel (Mono) as Amp partss output.An electrical device of type Class AB is involved.Computers and other communication devices feature 8 pins, which are pronged contacts.Amp parts is mounted in front of Surface Mount .The supply voltage of this electrical device is 2.5V~5.5V .1 channels are provided by the device.Amp parts is possible to operate wAmp partsh Depop, Short-Circuit and Thermal Protection, Shutdown .Temperatures should not exceed -40°C~85°C TA .There are 8 pins on this device.As part of Audio/Video Amplifiers , this part is included.Amp parts is a member of the TPA711 family.The maximal Output Power of this electronic part is 700mW kWh per hour.A normal operation requires a supply voltage (Vsup) above 2.5V .5.5V is the maximum supply voltage (Vsup).In this electronic part, the supply type is Single .Power is supplied by a 3.3/5V volt source.The device consumes 1.25mA quiescent current

TPA711DGNR Features


8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA711 family
700mW kWh per hour

TPA711DGNR Applications


There are a lot of Texas Instruments TPA711DGNR audio amplifiers applications.

  • Information processing
  • Proportional counter tubes
  • single/dual op amp sum and difference circuits
  • Proportional operation circuits
  • Instrumentation
  • Radar
  • High/low-pass filter circuit
  • Computer workstations and wireless base stations
  • High gain DC amplifier
  • Oscilloscopes

Write a review

Note: HTML is not translated!
    Bad           Good