TPA731DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA731 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.55mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.55mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA731DGNR Overview
A device has been embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in the case Cut Tape (CT) .There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .The device is of type Class AB .In a computer or other communication device, there are 8 pins, which are pronged contacts.The chip is mounted by Surface Mount .Amp parts is powered by a voltage of 2.5V~5.5V volts.Amp parts is equipped wAmp partsh 1 channels.When operating, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .A total of 8 pins are present in it.There is a part belonging to Audio/Video Amplifiers .This item belongs to the family of TPA731 .According to the manufacturer, the maximum output power of this electronic component is 700mW kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 2.5V .The maximal supply voltage (Vsup) reaches 5.5V .Single is the type of supply for this electronic part.As long as external factors do not affect it, it consumes 1.55mA of quiescent current.
TPA731DGNR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA731 family
700mW kWh per hour
TPA731DGNR Applications
There are a lot of Texas Instruments TPA731DGNR audio amplifiers applications.
- Communication
- Fast A/D and D/A converters, video amplifiers
- High gain DC amplifier
- Power generator
- Information processing
- Test equipment
- Signal amplification
- Integrator and differentiator circuits
- Multiplication and division circuits
- Portable electronic products powered by batteries
