TPA741D
| Parameters | |
|---|---|
| Quiescent Current | 1.45mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA741 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 725mW |
TPA741D Overview
8-SOIC (0.154, 3.90mm Width) contains an embedded device.The chip is recommended to be packaged in Tube case. Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is used for its output.The device belongs to the Class AB type of electrical devices.The 8 pins are pronged contacts which are part of a signal interface in a computer or other communication device.The electronic part is positioned in the way of Surface Mount .This electrical device has a 2.5V~5.5V supply voltage.There are 1 channels available on the device.Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured when operating.During operation, the temperature should not exceed -40°C~85°C TA .Amp parts is equipped wAmp partsh 8 pin count.Audio/Video Amplifiers incorporates this part.This chip is included in the TPA741 family.According to the manufacturer, the maximum output power of this electronic component is 700mW kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 2.5V .Vsup reaches 5.5V at the maximum.Supply type Single is assigned to this electronic part.Without external influences, it consumes 1.45mA of quiescent current.
TPA741D Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA741 family
700mW kWh per hour
TPA741D Applications
There are a lot of Texas Instruments TPA741D audio amplifiers applications.
- Semiconductor detectors
- Addition and subtraction operation circuits
- Medical instruments
- Medical imaging
- Broadcasting
- Vehicle electronics
- Automation control systems
- Portable electronic products powered by batteries
- High gain DC amplifier
- Fast A/D and D/A converters, video amplifiers
