TPA741DGNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA741 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.45mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA741DGNR Overview
I have embedded this device in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in the case Cut Tape (CT) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.The output it is configured with uses 1-Channel (Mono) .An electrical device of type Class AB is involved.Computers or other communication devices have 8 pins, which are pronged contacts.There is an electronic part mounted in the way of Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.There are 1 channels available on the device.When operating, Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.There should be no temperature increase above -40°C~85°C TA .There are 8 pins on this device.There is a part belonging to Audio/Video Amplifiers .This item belongs to the family of TPA741 .This electronic component's maximum output power is 700mW kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.5V .5.5V is the maximum supply voltage (Vsup).Amp parts is an electronic part wAmp partsh a supply type of Single .The system is powered by a 3.3/5V battery.Despite external influences, it consumes 1.45mA of quiescent current.
TPA741DGNR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA741 family
700mW kWh per hour
TPA741DGNR Applications
There are a lot of Texas Instruments TPA741DGNR audio amplifiers applications.
- Fast A/D and D/A converters, video amplifiers
- Proportional operation circuits
- Integrator and differentiator circuits
- Scintillation detectors
- Multiplication and division circuits
- Medical instruments
- Comparator
- Displayers for aircraft and air transportation control systems
- Signal filtering
- Automotive sensors
